www.maxonamerica.com
2. Out of Box Operation
1. In-Box Contents
(Subject to Change at Buyer’s Request)
5
6
Accessory Part Numbers:
ACC-640N: Radio Programming Software
MA-6260: 2,600mAH Li-ion Battery Pack
MA-0600: Dual Slot Charger
MA-0620: 10 Unit Dual Slot Gang Charger
MA-642: UHF “Digita” Antenna
MA-641: VHF “Digital”Antenna
Figure 1-1) MDP-6000 Series main accessories
Figure 2-1) How to tighten and loosen the antenna from the radio
Please read the instruction manual thoroughly before using the product. This
manual provides useful information related to the operation of the radio.
2.1 Antenna Installation and Removal
Turn the antenna clockwise to put on and tighten the antenna. Turn counterclockwise to loosen and
take off the antenna as shown in Figure 2-1.
2.2 Battery installation and Removal
As shown the figure 2-2 below, align the battery pack with the groove of the body (arrow 1) and push
it down (in the direction of arrow 2) to attach the battery. Battery latch will click shut when locked. To
remove the battery, pull the battery lock up (in the direction of arrow 3) and pull the battery away from
the radio.
1. Do not over tighten the antenna as it may cause damage to the radio.
2. NEVER HOLD by the antenna when carrying the transceiver.
3. Transmitting without an antenna may damage the transceiver.
1
2
Battery Latch
Belt Clip
User’s manual
Antenna
Dual slot charger
Belt Clip
Wrist Lanyard
Radio
Battery
