Page 9 of 13
M-KIT112/113/114 Assembly Instructions
181-03005
These instructions must be followed exactly. Failure to follow these instructions could damage the product or result in injury to persons
using or assembling the product. Maxon Furniture Inc. shall not be liable for any costs, loss, damage, expenses or injuries resulting from
failure to properly assemble the product in accordance with these instructions.
Maxon Furniture Inc.
Customer Service: 1-800-876-4274
Adding the Corner Shelf
The Corner Shelf will be installed onto the two
PL6636 Panels in the back corner of the cubicle.
Each P anel has a vertical row of slots on the end
for attaching components (Figure 12).
1. Install the Left-hand Shelf End Panel with the
top tooth at 5 slots down on the left PL6636
Panel. The Shelf End Panel will drop down
into the slots on the PL6636 Panel (Figure
13).
2. Repeat for the Right-hand Shelf End Panel.
ATTENTION! Ensure that the Shelf End
Panel Teeth are fully engaged with the
Panel slots.
3. Insert a Back Strip into the Left PL6636 Panel
by tilting the bottom of the Back Strip up
towards you. Allow the top tooth to go into
the exposed panel slots at the bottom of
the Shelf End Panel (Figure 14). At the back
corner, insert the top tooth so the Back Strip
is level with the Shelf End Panel.
4. Rotate the Back Strip down to lock in place.
5. Repeat Steps 3 - 4 to install the Back Strip on
the right PL6636 Panel (Figure 15).
Left-hand
End Panel
Back Strip
Bottom View
Figure 14
Figure 13
Top tooth in
5th slot from
the top
End
Panel
Figure 15
Back Strips
Left-hand
End Panel
Right-hand
End Panel
Left PL6636
Panel
Right PL6636
Panel
Figure 12
