Page 8 of 13
M-KIT112/113/114 Assembly Instructions
181-03005
These instructions must be followed exactly. Failure to follow these instructions could damage the product or result in injury to persons
using or assembling the product. Maxon Furniture Inc. shall not be liable for any costs, loss, damage, expenses or injuries resulting from
failure to properly assemble the product in accordance with these instructions.
Maxon Furniture Inc.
Customer Service: 1-800-876-4274
5. Install metal Wedge Brackets at all panel-
to-corner-post connections by inserting the
bracket flange between the Panel and the
Corner Post (Figure 10). Six Wedge Brackets
will be installed.
6. Install one Corner Post Cap onto each of the
three PLCP66 Corner Posts (Figure 11.a).
Three Corner Post Caps will be installed.
7. Install one End Cap into each of the two
PL6624 Top Caps (Figure 11.b).
8. Snap the Top Caps onto the two PL6624
Panels. The End Cap tab should fit into the
Panel frame.
9. Install one Top Cap Spacer into the end of
each of the four PL6636 Panel Top Caps
(Figure 11.a).
10. Snap the four Top Caps onto the PL6636
Panels with the Spacer end next to the Corner
Posts (Figure 11.c).
Figure 11.b
Figure 11.c
Figure 11.a
Corner Post Cap
Top Cap Spacer
on 36” Panel
ends next to
Posts (4 places)
Top Cap Spacer
Wedge
Brackets
Top View
Figure 10
Wedge Bracket
End Cap
End Caps
on 24” Panel
ends opposite
Posts (2 places)
Top Cap
