Page 10 of 13
M-KIT112/113/114 Assembly Instructions
181-03005
These instructions must be followed exactly. Failure to follow these instructions could damage the product or result in injury to persons
using or assembling the product. Maxon Furniture Inc. shall not be liable for any costs, loss, damage, expenses or injuries resulting from
failure to properly assemble the product in accordance with these instructions.
Maxon Furniture Inc.
Customer Service: 1-800-876-4274
6. Install the Shelf by placing the sides of the
Shelf into the Shelf Holding Brackets [on the
Shelf End Panels] and pushing it down into
place.
7. Make sure that the Shelf is fully seated and
flush with the Holding Brackets.
TIP! Pushing down by hand is usually
sufficient, but light taps with a rubber
mallet may be necessary.
8. Use three #8 x 1/2 “ Washer Head Screws to
attach each Back Strip to the Shelf.
CAUTION! Hold down the Shelf while
installing the screws. Otherwise, the
upward force may lift the Shelf and End
Panels off the Panels.
Figure 16
Figure 17
Shelf
Bottom View
Shelf Holding
Bracket
Left-hand
End Panel
Shelf
#8 x 1/2" Washer
Head screw
(3 in ea. Back Strip)
Back Strip
Insert Shelf flange into
Shelf Holding Bracket
