Maxon GPC X1-LDF, Руководство по установке

Страница: 16 / 76

Preparing for installation
10
3.3.1 Remove spare tire

If the vehicle has a spare tire
between the rear axle and the rear
bumper, remove the tire
(see Fig. 6).
3.3.2 Move exhaust pipe

If the exhaust pipe is at the rear,
move it to the side.
IMPORTANT: Changes to the exhaust
system must be carried out by qualified
personnel and according to the vehicle
manufacturer’s guidelines.
NOTICE

Be sure to maintain a sufficient
distance from heat-sensitive
parts. The minimum distance
from plastics and cables is
300 mm (see Fig. 7).
3.3.3 Mount supplementary battery

If applicable, mount a supplementary battery to supply power to the liftgate.
3.3.4 Install standard bumper
on Mercedes Sprinter

If the vehicle has a bumper
with an integrated step,
replace it with a standard
bumper (see Fig. 8).
3.3.5 Deactivate parking
sensors

For vehicles with rear parking sensors,
the sensors will no longer function
correctly once the platform is installed,
Fig. 6
Fig. 7
Fig. 8
Fig. 9