Maxon GPC X1-LDF, Руководство по установке

Страница: 57 / 76

Adjusting the liftgate
51
If necessary, adjust the height of the foldover section on the right side of the platform
using the right-hand adjustment fork (2) (adjustment screw accessible from below)
(see Fig. 78).
Legend:
Item 1 Adjustment screw
Item 2 Adjustment fork
Item 3 Hex bolt
Item 4 Support arm

Use the adjustment screw (1) to set the support arm (4) so that the platform stop
rests on and is supported by the support arm (4).
IMPORTANT: At the same time, check the stop (Section 5.4) on the foldover
section.

Rotating the adjustment screw (1) to the right lifts the support arm (4).

Rotating the adjustment screw (1) to the left lowers the support arm (4)
(see Fig. 79).

When finished adjusting, tighten the bolt (3) for securing the torsion bar to
11
5
N
m
(se
e
tor
qu
e
tab
le
on
pa
ge
68).
Fig. 78
Fig. 79