Maxon GPC X1-LDF, Руководство по установке

Страница: 22 / 76

Preparing for installation
16
3.6.3 Routing the cables to the front of the vehicle
For more information, look online under
http://www.taillift.org/en/electrical-vehicle-interface
IMPORTANT:
Follow the vehicle manufacturer’s installation guidelines.
NOTICE

When installing cables, make sure they are safe from chafing.

Do not install cables near heat-dissipating components.
With preparation according to ETMA Code A and Code B

Route the power cable and the cable for the cabin switch unit to the junction box
provided (Fig. 18).
Legen
d:
Item 1 Connector for cabin switch unit Part No. 20 910 754
Item 2 Connector for positive cable (red) Part No. 20 907 673
Item 3 Connector for negative cable (blue) Part No. 20 907 673
Fig. 18