manualshive.com logo in svg

Maxon EPOS 50/5, Справочник по аппаратуре

Поделиться
Скачать
Maxon EPOS 50/5 Скачать руководство пользователя страница 54

Setup
Connections

EPOS4 50/5 Hardware Reference

3-54

CCMC  |  2022-04  |  rel10445

  

3.3.15

Extension Slots (EXT1 & EXT2)

The controller provides two extension slots (

Figure 3-43) located underneath the plastic lid at the control-

ler housing’s top face. They host optionally available extension cards (

Table 3-64) and thereby expand 

the controller’s comprehensive motion control functionality even further. 

•

EXT1

 provides connectivity for a communication extension card, such as for EtherCAT.

With the optionally available «EPOS4 EtherCAT Card», the controller serves as slave in an 
EtherCAT network, provides access for EtherCAT master control (such as Beckhoff TwinCAT), and 
offers real-time operation in an Ethernet master/slave network. For further details see separate 
document 

«EPOS4 Communication Guide».

•

EXT2

 provides connectivity for advanced signal extension cards, such as for additional absolute 

sensors or customized signal extensions.
Using the respective optionally available EPOS4 cards, additional functions can be directly 
accessed via the connector 

“Extension Signal (X16)” on page 3-53.

Figure 3-43 

Extension slots

An inserted extension card mechanically interlocks in both horizontal and vertical direction.

To insert or remove an extension card, proceed as follows (explained using an «EPOS4 EtherCAT Card»):

Hot plugging/hot swapping the card may cause hardware damage

Switch off the controller’s power supply before removing or inserting an extension card.

Electrostatic sensitive device (ESD)

• Wear working cloth and use equipment in compliance with ESD protective measures.
• Handle device with extra care.

Continued on next page.

Содержание EPOS 50/5













































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды