EDACS - RECALLING NUMBERS, Continued
talking. Messages cannot be received when the PTT button is pressed.
If the signaling is unsuccessful, the radio will remain in the Special
Call mode and sound the appropriate alert tone(s).
When the call is complete, double click the M (Shift/ Clr/ Monitor)
button to exit the Special Call mode and return to the normal System/
Group display.
EDACS SPECIAL CALL KEYPRESS REFERENCE
(INDIVIDUAL CALLS)
To Place: SPC key -- DIGITS -- PTT
To Store: SPC key -- DIGITS -- # key -- 0-9 -- STO key
To Recall and Place: # key -- 0-9 -- RCL key -- PTT
(INTERCONNECT CALLS)
To Place: SPC key -- DIGITS -- * key -- PTT
To Store: SPC key -- DIGITS -- * key -- 0-9 -- STO key
To Recall and Place: * key -- 0-9 -- RCL key -- PTT
DTMF OVERDIAL
After the radio has acquired a working channel, if programmed, to
make a message trunked call, DTMF tones can be sent by pressing
and holding the PTT button and manually enter the desired numbers
using the keypad.
In the same manner, stored interconnect numbers (tones) may be sent
by recalling the desired storage location as described previously in the
Recalling Manually Stored Individual/Interconnect Numbers section.
Press the PTT button to send the tones.
SCAN OPERATION
ENABLE/DISABLE SCAN
To enable Group scanning, press the SCN (scan) key. The SCAN
identifier will display to indicate scan is active. To disable scan, press
the SCN (scan) key. The SCAN identifier will disappear to confirm scan
function is off.
22
