EDACS - INDIVIDUAL CALL, Continued
4. When the signaling is successfully completed, the BUSY indicator
will appear, and the call originate tone sounds. Speak directly into
the microphone. Release the PTT button as soon as you stop talking
and wait for a reply. Messages cannot be received when the PTT
button is pressed. If the signaling is unsuccessful, the radio will
remain in the Special Call mode and sound the appropriate alert
tone(s).
5. When the call is complete, double click the M (Shift/ Clr/ Monitor)
button to exit the Special Call mode and return to the normal
System / Group display.
INTERCONNECT CALL
1. Press the SPC (special) key to put the radio into Special Call mode.
The radio will display the last accessed call number from the pre-
programmed Special Call list. The PHONE and handset icon will
be displayed while in the Special Call mode.
2. Enter the telephone number to be called. The last digit entered
will always be displayed in the far right hand side of the display.
Any previously entered digits will scroll left. Only the last seven
characters will be visible in the display - the leading character
will scroll off the display with each new entry. To backspace and
clear a digit, press the SCN (scan) key.
NOTE
: To recall the last interconnect number entered manually from
the keypad, press the RCL (recall) key.
3. Complete the telephone entry by pressing the * key, indicating
that the digits are for an interconnect call. The * will not be
displayed, but a tone will sound.
4. Press and release the PTT button to initiate the call. The radio
will perform the required signaling to obtain a working channel.
When the signaling is successfully completed, the BUSY indicator
will appear and the proper DTMF tones will be sent and heard at
the speaker. If the interconnect signaling is unsuccessful, the radio
will remain in the Special Call Mode and sound the appropriate
alert tone(s).
19
