maxon motor EPOS4 Compact 50/8 CAN Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 106

background image

About
About the Devices

maxon motor control

1-8

Document ID: rel8399

EPOS4 Positioning Controller

Edition: November 2018

EPOS4 Module/Compact 50/8 Hardware Reference

© 2018 maxon motor. Subject to change without prior notice.

1.2

About the Devices

Capabilities of the
device, included fea-
tures, and supported
motors.

maxon motor control’s EPOS4 Module 50/8 and EPOS4 Compact 50/8 are small-sized, full digital, smart
positioning control units. Their high power density allow flexible use for brushed DC and brushless EC
(BLDC) motors up to approximately 400 Watts with various feedback options, such as Hall sensors,
incremental encoders as well as absolute sensors in a multitude of drive applications.

The devices are specially designed to be commanded and controlled as a slave node in a CANopen or
EtherCAT network. In addition, the units can be operated via any USB or RS232 communication port of
a Windows or Linux workstation (the Module thereby requires an external transceiver). Moreover, the
integrated extension interface of the Module allows pooling with optionally available communication
interfaces or other additional functionalities.

Latest technology, such as field-oriented control (FOC), acceleration/velocity feed forward, or dual loop,
in combination with highest control cycle rates allow sophisticated, ease-of-use motion control.

Thanks to its smart design, the EPOS4 Module 50/8 can either be used in combination with EPOS4 CB
Power connector boards as a compact, integrated solution or be incorporated into customer-specific
motherboards for single axis or multi axes motion control systems. The controller is available in the fol-
lowing configurations:

•

EPOS4 Module 50/8 (504384)

Plug-in module for use with maxon motor control EPOS4 connector boards or customer-spe-
cific motherboards

•

EPOS4 CB Power CAN (520884)

Connector board for initial commissioning or combination to a compact solution providing all
connectors, including CANopen and RS232 interface

•

EPOS4 CB Power EtherCAT (604594)

Connector board for initial commissioning or combination to a compact solution providing all
connectors, including EtherCAT interface

•

EPOS4 Compact 50/8 CAN (520885)

Fully integrated, compact, ready-to-use assembly of plug-in module and CANopen connector
board

•

EPOS4 Compact 50/8 EtherCAT (605298)

Fully integrated, compact, ready-to-use assembly of plug-in module and EtherCAT connector
board

Figure 1-2

Configuration overview

«
...
6
7
8
9
10
...
»

Содержание EPOS4 Compact 50/8 CAN











































































































Отзывы:

Нет отзывов

Похожие инструкции для EPOS4 Compact 50/8 CAN

Бренд: QCON Страницы: 4

Бренд: Acclaim Lighting Страницы: 32

Бренд: Jeep Страницы: 19

Бренд: Daikin Страницы: 38

Бренд: Daikin Страницы: 2

Бренд: Daikin Страницы: 148

Бренд: Daikin Страницы: 12

Бренд: Daktronics Страницы: 52

Бренд: Waeco Страницы: 20

Бренд: Z-Wave Страницы: 56

Бренд: Gardigo Страницы: 8

Бренд: Gardigo Страницы: 19

Бренд: Van Air Страницы: 4

Бренд: jbc Страницы: 4

Бренд: jbc Страницы: 4

Бренд: EasySMX Страницы: 11

Бренд: EasySMX Страницы: 8

Бренд: Fox Страницы: 5

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды