maxon motor
16
maxon motor control
1-Q-EC Amplifier DEC Module 50/5
Operating Instructions
April 2015 Edition / document number 1094861_PDF_E - 05 / subject to change
8 Dimensional Drawing
Dimensions in [mm]
9 Accessories (not included in delivery)
maxon motor order number
Designation
370652
DEC Module Evaluation Board
10 Appendix «Motherboard Design Guide»
10.1 Introduction
The present documentation «Motherboard Design Guide» contains helpful
information on the integration of the DEC Modules 50/5 into printed circuit
boards. Contained therein are recommendations for possibly needed 3rd par-
ty components, suggestions on layout, terminal assignment as well as circuit
samples.
Warning:
a
Development of printed circuits boards requires specific qualifications
and should only be performed by experienced electronics engineers.
The present brief instruction is intended to serve as supporting aid only
and does not claim completeness. Upon request, maxon motor ag is
glad to assist and to offer customer-specific motherboard designs.
10.2 External components
10.2.1 Pin socket
The connector arrays used in the DEC Module 50/5 permit two possible types
of connections. The module can either be mounted on pin socket or soldered
directly into the printed circuit board
.
Pin socket recommendations:
Specifications:
–
Pin socket vertical, single row, mates with pin header 0.63 x 0.63 mm,
pitch 2.54 mm, 3 A, contact material gold or brass
Pin socket 8 poles, single row:
–
Preci-Dip 801-87-008-10-001101
–
Samtec SSW-108-01-F-S
–
Harwin M20-7820842
Pin socket 9 poles, double row
–
Preci-Dip 803-87-018-10-001101
–
Samtec SSW-109-01-F-D
–
Harwin M20-7830942