Operating Instructions LSV Series
MaxLite 8ft Vapor Tight - LSV Series
®
© Copyright 2021 MaxLite, Inc. All Rights Reserved.
12 York Ave, West Caldwell, NJ 07006 Tel: 800-555-5629 Fax: 973-244-7333 Email: [email protected]
Page: 7
REV: 10/29/21
Chain Suspended Mounting Installation Instructions (Continued)
outlet box
cover
ground wire
7.
Connect power supply to the driver through the
outlet box as shown in the figure (the flexible cord
is customer supplied), make sure to snap the
cover to the outlet box after wiring is completed.
8.
Follow the general wiring diagram above for
reference. Make sure that the power supply is
disconnected before installing.
9.
Reattach LED tray to fixture by reversing step 5.
10.
Secure lens to housing with lens latches.