Operating Instructions LSV Series
MaxLite 8ft Vapor Tight - LSV Series
®
Surface Mounting Installation Instructions (Continued)
outlet box
cover
ground wire
5.
Locate safety cable when opening to install fixture body and Snap connect tether to gear tray before
making electrical connection as shown in figure.
6.
Connect power supply to the driver through
the outlet box as shown in the figure (the
flexible cord is customer supplied), make
sure to snap the cover to the outlet box after
wiring is completed.
7.
Follow the general wiring diagram above for
reference. Make sure that the power supply
is disconnected before installing.
© Copyright 2021 MaxLite, Inc. All Rights Reserved.
12 York Ave, West Caldwell, NJ 07006 Tel: 800-555-5629 Fax: 973-244-7333 Email: [email protected]
Page: 4
REV: 10/29/21