Setting Wattage & Color Temperature
Note:
Applicable to models ending in WCS only. Models are set to lowest wattage and 4000K.
L
M
H
35
00
K
40
00
K
50
00
K
Color settings:
Left, stands for 3500K;
Middle, stands for 4000K;
Right, stands for 5000K;
Wattage settings:
Left, stands for Low;
Middle, stands for Medium;
Right, stands for High;
The end users may adjust the color temperature and lumen output respectively by the two DIP switch. Each DIP
switch is accommodated with 3 options (left, middle and right ), corresponding to 3 color temperatures and 3
powers respectively, which can perform the desired color temperature and lumen output combination.
1.
DIP switches are located onto the side of the fixture.
2.
Select a wattage and color temperature by sliding switch left or right respectively to the desired value.
Wattage Switch
CCT Switch
Operating Instructions LSV Series
MaxLite 8ft Vapor Tight - LSV Series
®
© Copyright 2021 MaxLite, Inc. All Rights Reserved.
12 York Ave, West Caldwell, NJ 07006 Tel: 800-555-5629 Fax: 973-244-7333 Email: [email protected]
Page: 2
REV: 10/29/21
