General Wiring Diagram
CAUTION:
Turn off electrical power at fuse
or circuit breaker box before wiring fixture to
the power supply.
Input Rating: 120-277V 50/60 Hz
Black = Line
White = Neutral
Green = Ground
TO SOURCE
120V-277V
GREEN (GROUND)
BLACK (LINE)
WHITE (NEUTRAL)
RED
BLUE
PURPLE GREY/
PINK
LED DRIVER
+
-
-
+
(LEAD WIRES TO LED LOAD)
(DIMMING WIRE TO 0-10V
IEC COMPLIANT CONTROL)
Surface Mounting Installation Instructions
Operating Instructions LSV Series
MaxLite 8ft Vapor Tight - LSV Series
®
1.
Locate drill holes for mounting brackets. Use hardware found in hardware kit. Mount bracket to surface.
2.
Secure mounting clips to housing recesses by firmly pressing them into place until both
sides of the clip are secured.
3.
Release latches by pulling top of
latch away from housing.
4.
Without touching LED boards,detach LED
tray from fixture.
© Copyright 2021 MaxLite, Inc. All Rights Reserved.
12 York Ave, West Caldwell, NJ 07006 Tel: 800-555-5629 Fax: 973-244-7333 Email: [email protected]
Page: 3
REV: 10/29/21
