Bending Diameter
150mm
1. The most suitable operation temperature
shall be -25°C to 50°C.
2. Pls make sure that even during installation,
the predetermined bending direction is
NEVER changed. The product only have top
bending, and can not be twisted.
3. HYDROFLEX MINI LED shall not be bent
sharply. PC core and en-capsulation can not
prevent any demage
4.The maximum bending diameter is 150mm,
over bending will damage and void any
warranty.
5.During the installation, the HYDROFLEX
MINI LED
can not be:
-Twisted
-Dropped
-Bent at a 90°angle or bent at all
-Sagging/Hanging down
6. Do not leave it together with card or paper
directly as it will influence the surface clean.
7. For installation, 3 ways for your selection.
-Mounting clips
-Alumium profile
-3M tape
8. For the cutting unit, it is 50mm for white
color and 83.33mm for RGB.
MOUNTING INSTRUCTION
10 mm
10 mm
Bend too tight
Do not twist
Do not hang
Do not droop
LIGHT SOURCE
LIGHT SOURCE
LIGHT SOURCE
LIGHT SOURCE
10mm
5030mm
5mm
10mm
STANDARD DIMENSION
HYDROFLEX MINI LED
CODES:401801-02-03
