Maximum 054-7287-8, Инструкция по эксплуатации

Страница: 8 / 24

8
model no. 054-7287-8 | contact us 1-888-670-6682
• Always wear eye protection and a dust mask for dusty applications and when
absorbed by your eyes and inhaled easily and may cause health complications.
Protect your hearing while using this tool.
• Never leave the trigger locked “ON”.
Before plugging the tool in, check that
the trigger lock is “OFF”. Accidental start-ups could cause injury.
• Keep hands away from cutting area. Do not reach under the material being cut.
The proximity of the blade to your hand is hidden from your sight.
• Do not use dull or damaged blades. Bent blade can break easily or cause
kickback.
• Before starting to cut, turn tool “ON” and allow the blade to come to full
speed. Tool can chatter or vibrate if blade speed is too slow at beginning of
cut and possibly kickback.
• When removing the blade from the tool avoid contact with skin and use
proper protective gloves when grasping the blade or accessory. Accessories
may be hot after prolonged use.
• The label on your tool may include the following symbols. The symbols and
their definitions are as follows:
V ..................... Volts
A ..................... Amperes
Hz ................... Hertz
W .................... Watts
min ................. Minutes
................... Alternating current
................ Direct current
n ...................... Rated speed
n
0
.................... No-load speed
.................. Class II Construction
…/min ............ Revolutions or reciprocations per minute
................. Grounding terminal
BPM ............... Beats per minute
RPM ............... Revolutions per minute
OPM ............... Orbits per minute
SPM ............... Strokes per minute
................. WARNING – To reduce the risk of injury, the user must read
the instruction manual.
................. WARNING – To reduce the risk of injury, always wear eye
protection.
................. WARNING – To reduce the risk of injury, always wear ear
protection.
S
AFETY GUIDELINES