11
Troubleshooting
Problems
Reasons
Remedy:
Machine does not work
1. Power cord is not
plugged in well.
2. Problem from the
power supply.
1. Plug in, turn on the
machine.
2. Check if the other
Machines work normally.
Water temperature
does not increase
1. Set temperature
below or close to the
water temperature.
2. Set heating time is
too short.
1. Check the setting.
2. Prolong the heating
time.
Water goes on heating
after the set
temperature
is reached.
1. Program is wrong.
2. Temperature sensor
is invalid.
3. The circulator does
not rotate.
1. Restart the power switch.
2. Repaired by the specialist.
3. Repaired by the specialist.
E01 appears on the
display.
1. Machine does not be
put into water.
2. Water level is too
low.
1. Put the machine into water
and restart the power
switch.
2. Add water, make sure the
water level is between the
MIN and MAX line.
