Installing Base with
Vehicle Belt
1
2
3
Place Base in Vehicle Seat
Lay Top Tether Strap
Over the Vehicle Seat
You will be installing the top
tether strap in steps 7 & 8.
Review the vehicle owner’s
manual for the tether
anchor locations.
Open Belt Lock Off
Squeeze the lever to open
the belt Lock Off & pull it
forward.
1
2
3
1
2
3
1
2
3
1
2
3
4
Weave Vehicle Seat
Belt In and Out of
Belt Path As Shown
Buckle the vehicle belt.
1
2
3
1
2
3
Before installing the car seat in your vehicle, check to see if needed
to adjust the buckle position for your child.
See page 23 for Rear-Facing buckle positions.
See page 30 for Forward-Facing buckle positions.
Once the car seat is installed, you will not be able to adjust the
buckle position.
Review Vehicle Owner’s Manual
Determine what kind of vehicle belts your car has and how to use
them to lock a car seat in place
OR
where LATCH: lower anchor
seating positions are located in your vehicle.
DO NOT
use both the LATCH: lower anchor belt and
vehicle belt at the same time to install the car seat.
When anchors are available, you
MUST
ALWAYS
attach, adjust, and secure the tether (top anchorage)
strap when installing the car seat.
WARNING:
5
6
continued on next page