16
15
Before installing the car seat in your vehicle, check to see if you
need to adjust the buckle position for your child.
See page 23 for Rear-Facing buckle positions.
See page 30 for Forward-Facing buckle positions.
Once the car seat is installed, you will not be able to adjust the
buckle position.
Review Vehicle Owner’s Manual
Determine what kind of vehicle belts your car has and how to use
them to lock a car seat in place
OR
where LATCH: lower anchor
seating positions are located in your vehicle.
The Car Seat Cradle MUST BE Side-Facing to
attach or remove the car seat from the base.
To recline car seat
, see page 18.
DO NOT
use both the LATCH: lower anchor belt and
vehicle belt at the same time to install the car seat.
Base Use
WARNING:
1
2
Align Bar on Back of
Car Seat into Cradle
Push Down on Front
of Car Seat to
Lock into Cradle
Back of Car
Seat Goes Here
Front of Car
Seat Goes Here
The car seat has been
installed into the
Side-Facing position.
FINISHED!
To Remove Car Seat from Base
1.
Squeeze the Car Seat Release Handle.
2.
Pull Car Seat up from the base.
