Page 11 of 13 pages
g.
Attach stickers
to the fuselage‟s
forward-sides
near the cabin.
55.
Install the optional „Detail Upgrade‟ items using CA adhesive and the predrilled holes or other supplied mounting
hardware:
a.
Simulated
A
IR
S
PEED
S
ENSOR
and
L
IGHT
:
Use the predrilled holes near the strut anchors and CA adhesive.
b.
Simulated Oil Cooler: Use CA adhesive, the predrilled hole just-forward of
the front A-frame attachment point, and the hole located approx. 3/4-inch
forward of the bottom-back edge of the fiberglass cowl cowl (cut an opening
in the bottom of the cowl to expose the more forward predrilled hole).
c.
Simulated Machine Gun: Make a keyhole- shaped
opening in the rear of the canopy; using the
provided metal strap and screws, mount the
machine gun to the predrilled holes at the bottom-
rear of the canopy.
d.
Dashboard and Pilot Seat: Secure the dashboard
with CA adhesive or fasten it with the provided
wood screws; the pilot seat attaches to your LiPo
battery with the supplied hook-and-loop material.
WARNING: If you use the seat to help „handle‟ your battery, be careful to not apply too much force to the seat.
L
L
i
i
p
p
o
o
b
b
a
a
t
t
t
t
e
e
r
r
y
y
V.2-150423
Entire Contents © Copyright 2013 by Maxford USA
