Page 10 of 13 pages
54.
Apply the adhesive-backed sticker identification-markings:
c.
Using scissors, cut around the edge of each marking; then, using a sharp blade or pin, separate each adhesive-backed sticker
from its clear plastic or brown paper backing.
d.
Attach stickers
to the wing‟s
outboard top
and bottom
surfaces.
e.
Attach stickers
to the wing‟s
inboard
bottom
surfaces.
f.
Attach stickers
to the fuselage‟s
aft-sides
and to both sides
of the rudder.
Approx. 1-inch
behind the hinges
Approx. 4¾-inches in front
of horizontal stab.
V.2-150423
Entire Contents © Copyright 2013 by Maxford USA
