Copyright Maxford USA 2019
5.
Preflight checks:
a.
If any weight was added in the nose or tail
b.
Double-check the condition and
c.
Make certain all screws, clevises and other
(Do not attempt to fly with any damaged or frayed
d.
Double-check all control directions and
e.
As with all radio-controlled model airplanes, this model must pass the radio range ground check
recommended by your radio’s manufacturer or you ma
f.
Make it a habit to set your transmitter’s throttle control safely to minimum before turning ON your
transmitter and receiver and
g.
Setup and operate your radio-
instructions and follow the guidelines offered by the Academy of Model Aeronautics, your local R/C
club, and concerned manufacturers,
VI. SAFETY PRECAUTIONS & ASSEMBLY TIPS
(
IMPORTANT – READ THIS SECTION
1.
This product should not be considered a toy, but rather a sophisticated, working model that functions
much like a full-scale airplane. Because of its performance capabilities, this product, if not assembled and
operated correctly, could cause injury to you
provides you with a high-quality, thoroughly tested model airplane kit
instructions. However, the quality and capabilities of your finished model airplane depend on how you
assemble it, and your safety depends on how you use and fly it. Any testing or flying of this model airplane
is done entirely at your own risk.
2.
Assemble this model airplane according to these
model beyond any assembly and/or
result in an unsafe or unworkable model. If the instructions differ from the photos, the written
instructions should be considered correct. If you have any question or
before you proceed with assembly of this product, contact your dealer or speak to a Maxford USA
customer service representative at
9 AM to 5 PM Pacific Time).
3.
While this kit has been flight-tested to meet or exceed our rigid performance and reliability standards in
normal use, if you elect to attempt any high
larger power system than specified, you
taking any and all necessary steps to reinforce the high
more suitable for such increased stresses.
4.
Throughout the lifetime of this model, use o
or well-maintained radio-control system
5.
Before you begin assembly of this model airplane, study the instructions and test
you fully understand the instructions and that no parts are missing, damaged or unsatisfactory.
parts may differ slightly from those pictured
differences between the factory, our warehouse and your home or workshop
slight adjustments to these instructions
and alignment. We recommend you contact us before attempting any such adjustment.
6.
It is your responsibility to install the receiver and
model passes all applicable safety/range tests and that the power system and controls operate correctly.
7.
Recheck the operation of this model before
and that the model remains structurally sound
Do not fly without replacing any that you find damaged or worn.
Page 4 of 13
in the nose or tail to adjust the CG, ensure it remains secure.
condition and secure attachment of your propellers and batteries
Make certain all screws, clevises and other mechanical and electrical connections are secure.
(Do not attempt to fly with any damaged or frayed electrical or mechanical connection.)
control directions and the amounts of control throws.
controlled model airplanes, this model must pass the radio range ground check
recommended by your radio’s manufacturer or you may not fly safely.
ake it a habit to set your transmitter’s throttle control safely to minimum before turning ON your
receiver and starting your engines or connecting your Lipo flight batteries
-control and power systems according to their manufacturer’s
instructions and follow the guidelines offered by the Academy of Model Aeronautics, your local R/C
club, and concerned manufacturers, who all wish to help ensure your safe enjoyment of this hobby.
TY PRECAUTIONS & ASSEMBLY TIPS
THIS SECTION CAREFULLY BEFORE YOU BEGIN ASSEMBLY
This product should not be considered a toy, but rather a sophisticated, working model that functions
scale airplane. Because of its performance capabilities, this product, if not assembled and
operated correctly, could cause injury to you or to spectators and damage to property. Maxford USA
quality, thoroughly tested model airplane kit and written/photo
instructions. However, the quality and capabilities of your finished model airplane depend on how you
assemble it, and your safety depends on how you use and fly it. Any testing or flying of this model airplane
model airplane according to these written/photo instructions. Do not alter or modify the
/or power-system options covered in these instructions
result in an unsafe or unworkable model. If the instructions differ from the photos, the written
correct. If you have any question or concern about the instructions,
before you proceed with assembly of this product, contact your dealer or speak to a Maxford USA
customer service representative at 562-529-3988 (Monday through Friday, except national holidays,
tested to meet or exceed our rigid performance and reliability standards in
any high-stress flying, such as racing or aerobatics, or if you install a
larger power system than specified, you (the buyer or user of this product) are solely responsible for
taking any and all necessary steps to reinforce the high-stress points and/or substitute hardware that is
more suitable for such increased stresses.
Throughout the lifetime of this model, use only the Maxford USA-recommended power system and a new
control system with fully charged batteries.
Before you begin assembly of this model airplane, study the instructions and test-fit each part to ensure
instructions and that no parts are missing, damaged or unsatisfactory.
parts may differ slightly from those pictured in this manual. Due to temperature and/or humidity
differences between the factory, our warehouse and your home or workshop, there may
these instructions and/or to some mounting surfaces to ensure proper
e recommend you contact us before attempting any such adjustment.
It is your responsibility to install the receiver and to connect the R/C components in such a way that this
model passes all applicable safety/range tests and that the power system and controls operate correctly.
Recheck the operation of this model before every flight to ensure all equipment is still operating correctly
structurally sound; also check all electrical, control and structural connections
o not fly without replacing any that you find damaged or worn.
RS190529
remains secure.
and batteries.
connections are secure.
electrical or mechanical connection.)
controlled model airplanes, this model must pass the radio range ground check
ake it a habit to set your transmitter’s throttle control safely to minimum before turning ON your
flight batteries.
manufacturer’s
instructions and follow the guidelines offered by the Academy of Model Aeronautics, your local R/C
all wish to help ensure your safe enjoyment of this hobby.
BEGIN ASSEMBLY
)
This product should not be considered a toy, but rather a sophisticated, working model that functions
scale airplane. Because of its performance capabilities, this product, if not assembled and
spectators and damage to property. Maxford USA
written/photo assembly
instructions. However, the quality and capabilities of your finished model airplane depend on how you
assemble it, and your safety depends on how you use and fly it. Any testing or flying of this model airplane
Do not alter or modify the
system options covered in these instructions; doing so may
result in an unsafe or unworkable model. If the instructions differ from the photos, the written
concern about the instructions,
before you proceed with assembly of this product, contact your dealer or speak to a Maxford USA
(Monday through Friday, except national holidays,
tested to meet or exceed our rigid performance and reliability standards in
aerobatics, or if you install a
(the buyer or user of this product) are solely responsible for
stress points and/or substitute hardware that is
recommended power system and a new
fit each part to ensure
instructions and that no parts are missing, damaged or unsatisfactory. Some
emperature and/or humidity
there may be some need for
some mounting surfaces to ensure proper installation
e recommend you contact us before attempting any such adjustment.
connect the R/C components in such a way that this
model passes all applicable safety/range tests and that the power system and controls operate correctly.
every flight to ensure all equipment is still operating correctly
check all electrical, control and structural connections.