
Copyright Maxford USA 2019
Page 2 of 13
RS190529
Table of Contents:
I.
Specifications
......................................................
2
VI.
Safety precautions & assembly tips
..................................
4
II.
Parts list
................................................................
2
VII. Limited warranty, liability waiver & return policy ...... 6
III.
Special features
...................................................
3
VIII. Photo instructions and assembly notes ......................... 7
IV.
Important things customers must know
...........
3
IX.
Initial setup, adjustments and preflight checks ............. 12
V.
Storage, field setup & preflight checks
...........
3
I. SPECIFICATIONS
*
Wingspan .................................................................................................................................................................. 105 inches
Length ........................................................................................................................................................................... 83 inches
Wing area ............................................................................................................................................... 2,136 square inches
ARF-only weight ........................................................................................................................................ about 12 pounds
Center of gravity (CG) ............................................................................................... 10.35
inches (approx. 263 mm)
back from the leading edge of the wing
Radio system (not included) .............. Minimum of 4 channels with 5 standard servos for electric setup
6 standard servos for gas or glow setup,
(2 for rudder and the other 2 for ailerons)
Recommended power ....................................................... 40~50cc gas or equivalent-powered electric motor
*
(Dimensions and weights are approximate.)
II. PARTS LIST
1.
Included items
Pre-covered fuselage, wing panels, ailerons,
empennage with elevator and rudder.
Cockpit hatch
Landing gear, main and tail wheels
Fiberglass cowl
Decal set
Control surface hinges
Composite wing joiner, control horns and
related hardware (except items normally
supplied with servos, engines and motors).
Aileron, rudder and elevator pushrods and
related linkages.
This illustrated instruction manual.
2.
Items you must supply to complete this ARF
Cyanoacrylate (CA) and epoxy adhesives and optional threadlock compound.
Common household shop tools (screwdriver, pliers, etc.).
Power system, 40~50cc gas or equivalent-powered electric motor.
Propeller as recommended by the maker of your power system.
4 (or more) channel radio system.
6 standard servos (such as Hitec HS311) when using a gas engine, or 5 standard servos if using an
electric power system.
2 of 24-inch extensions and 2 of 12-inch Y-harness
2 of Maxford USA
1/5 WWI Pilot Figures