MAXDATA Performance 120T, Руководство пользователя

Страница: 67 / 90

Section 5 TROUBLE SHOOTING
5-11
n Windows NT 4.0 does not support infrared devices.
n Remove any objects that sit between the communicating
path.
n Make sure the communicating devices are not more than 1
meter apart and are aligned in a straight-line fashion.
n Make sure that IR device is enabled in the Control Panel. If
the infrared icon at the lower right corner of the task bar has
a red ‘x symbol, it is being disabled. Click on the icon and in
the Option page check off the Infrared Communication item.
n Check the infrared setting in BIOS Setup utility. Go to
Section 2 BIOS Setup to find out how this is done. If you are
using Windows 95 and have enabled Fast IR option in the
BIOS Setup, you must load the vendor-specific IR driver
manually for it to work (Windows 95 comes with standard
IrDA driver only.)
Memory Problems
The POST does not show an increased memory capac-
ity when you have already installed additional memory -
n Certain brands of memory module may not be compatible
with your system. You should ask your vendor for a list of
compatible makers of the DIMM.
n The memory module may not be installed properly. Go back
to Section 4
Upgrating Your Notebook
to review the details
of this operation.
n The memory module may be defective.
The O/S issues an insufficient memory error message
during operation -
n This is often a software or Windows-related problem.
n Close the application programs you’re not using and restart
the system.
n Otherwise, you have to install additional memory module.
For instructions, go to Section 4
Upgrading Your Notebook
.