MAXDATA Performance 120T, Руководство пользователя

Страница: 29 / 90

Section 2 BIOS SETUP & SECURITY
2-7
The Menu of Advanced CMOS Setup
Advanced CMOS Setup for configuring system options.
Item Selections /
Sub-menu Description
1st Boot
Device
Set the type of device for the 1st boot
drive that BIOS attempts to boot from after
BIOS POST completes.
2nd Boot
Device
Set the type of device for the 2nd boot
drive that BIOS attempts to boot from after
BIOS POST completes.
3rd Boot
Device
Disabled
IDE-0
Floppy
CDROM
Set the type of device for the 3rd boot
drive that BIOS attempts to boot from after
BIOS POST completes.
Boot Up
NumLock On
Off
Turn the numeric keys on or off as system
boots up.
TouchPad
Support Enabled
Disable
Turn on or off TouchPad support
Password
Check Setup
Always
[Setup]:
To enable the password check function
every time when BIOS Setup is executed.
[Always]:
To enable the password check function
every time the system boots.
LCD
Expand Enabled
Disabled
When enabled, the displaying content is
expanded to fill the entire LCD screen in
DOS mode.
Share
Memory
Size 8 / 16 / 32 MB (or
more) This option allows user to define the
amount of system memory to be used as
display memory or buffer. Share memory
size may be set up to 50% of the total
system memory size.
This notebook employs Share Memory architecture, which means
the graphic engine use a portion of the system memory as display
memory. The more system memory is allocated for display use, the
less memory is available for the system use.
For example, if 8MB out of total system memory of 64MB was set
as VGA shared memory, the system would only show 56MB
during the Power-On Self Test (POST).