Maxcess MAGPOWR Spyder-Plus-S1, Инструкция по эксплуатации

Страница: 64 / 68

12.0 COMMUNICATION (OPTIONAL)
www.maxcessintl.com MAGPOWR Spyder-Plus-S1 Tension Control MI 850A351 1 C Page 64 of 68
Starting
Modbus
Register
Parameter Name
Parameter
Format
Parameter
Type
Used with
Control Types
Read /
Write
Range
0x7B Digital Input Active State BYTE Data
LC, DTND,
DTD, DS, OPT Read /
Write 0 = Active Low
1 = Active High
0x7C Security State BYTE None
LC, DTND,
DTD, DS, OPT Read
Only 0 = Not Locked
1 = Locked
0x7D Security Code UINT16 None
LC, DTND,
DTD, DS, OPT Write
Only
{ 0 - 9999 }
0x7E Numeric Display Rate FLOAT Data
LC, DTND,
DTD, DS, OPT Read /
Write
{ 0.0 - 60.0 } seconds
0x80 Bar Graph Display Rate FLOAT Data
LC, DTND,
DTD, DS, OPT Read /
Write
{ 0.0 - 60.0 } seconds
0x82
Position Setpoint 0% Calibration
Point
FLOAT Cal
DTND, DTD,
DS Read /
Write
{ 0 - 4095 }
0x84
Position Setpoint 100% Calibration
Point
FLOAT Cal
DTND, DTD,
DS Read /
Write
{ 0 - 4095 }
0x86 Dancer 0% Calibration Point FLOAT Cal
DTND, DTD,
DS Read /
Write
{ 0 - 4095 }
0x88 Dancer 100% Calibration Point FLOAT Cal
DTND, DTD,
DS Read /
Write
{ 0 - 4095 }
0x8A Tuning Type (Dancer Torque) BYTE Data DTND
Read /
Write 0 = PD
1 = PID
0x8B Tuning Type (Dancer Speed) BYTE Data DS
Read /
Write 0 = P
1 = PI
0x8C Proportional Gain (Dancer) FLOAT Data
DTND, DTD,
DS Read /
Write
{ 0.0 - 999.0 }
0x8E Integrator Time (Dancer) FLOAT Data
DTND, DTD,
DS Read /
Write
{ 0.0 - 60.0 } seconds
0x90 Initial Screen (Load Cell) BYTE Data LC
Read /
Write
0 = Operator Menu
1 = Tension
2 = Output Level
0x91 Initial Screen (Dancer) BYTE Data
DTND, DTD,
DS Read /
Write
0 = Operator Menu
1 = Position
2 = Output Level
0x92 Use Taper? BYTE Data LC, OPT
Read /
Write 0 = No
1 = Yes
0x93 System State Status UINT16 None
LC, DTND,
DTD, DS, OPT Read
Only
0 = Hold
1 = Start
2 = Run
3 = Stop
4 = E-Stop
5 = Manual
0x94 Tension On/Off Status UINT16 None
LC, DTND,
DTD, DS, OPT
Read
Only
0 = Tension Off
1 = Tension On
0x95 Tension Setpoint FLOAT None LC
Read
Only
{ 0.0 - 99999.0 } lb.
0x97 Actual Tension FLOAT None
LC, DTND,
DTD
Read
Only
{ 0.0 - 99999.0 } lb.
0x99 Actual Output FLOAT None
LC, DTND,
DTD, DS, OPT
Read
Only
{ 0.0 - 100.0 } %
0x9B Actual Diameter FLOAT None
LC, DTD, DS,
OPT
Read
Only
{ 0.0 - 999.0 } in.
0x9D Position Setpoint FLOAT None
DTND, DTD,
DS
Read
Only
{ 0.0 - 100.0 } %
0x9F Actual Position FLOAT None
DTND, DTD,
DS
Read
Only
{ 0.0 - 100.0 } %
0xA1 Device Name STRING Data
LC, DTND,
DTD, DS, OPT
Read /
Write
31 Characters Maximum
0xB1 Program Version UINT32 None
LC, DTND,
DTD, DS, OPT
Read
Only
920Axxx.yyy
xxx,yyy={0 - 999}
xxx = High Word
yyy = Low Word
0xB3 Modbus Address UINT16 Data
LC, DTND,
DTD, DS, OPT
Read /
Write
{ 0 - 255 }