Maxcess MAGPOWR Spyder-Plus-S1, Инструкция по эксплуатации

Страница: 30 / 68

7.0 DANCER CONTROL
www.maxcessintl.com MAGPOWR Spyder-Plus-S1 Tension Control MI 850A351 1 C Page 30 of 68
7.5.3 OPTIMIZE TUNING - SECOND STEP
7.5.3.1
Dancer, Torque, no Diameter
Navigate to the Tuning menu and press

. For a Dancer in Torque mode, one of the following screens will be
displayed depending on the tuning type selected:
PD Tuning
PID Tuning
The Spyder should be optimized at or near core first. On unwinds Quick Stab may be needed while an initial roll is
unwound.
The Spyder should be optimized at full roll only after it has been optimized at core. On rewinds
Quick Stab may be
needed to keep the system stable while a roll is wound.
See 7.5.3.3 for a typical tuning screen.
7.5.3.2
Dancer, Speed, with and without Diameter
Navigate to the Tuning menu and press

. For a Dancer in Speed mode one of the following screens will be
displayed depending on the tuning type selected:
P Only Tuning
PI Tuning
The Spyder should be optimized at or near full roll first. On rewinds Quick Stab may be needed while a full roll is
wound.
The Spyder should be optimized at core (PI tuning) only after it has been optimized at full roll. On unwinds
Quick
Stab may be needed to keep the system stable while an initial roll is unwound.