background image

10

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC 
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. 
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with 
the operating instructions, may cause harmful interference to radio communications, however, there is no guarantee that 
interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television 

reception, which can be determined by turning the equipment off and in, the user is encouraged to try to correct the 

interference by one or more of the following measures:

● Reorie

nt or relocate the receiving antenna.

● Increase the separation between the equipment and the receiver.

● Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

● Consult the dealer or an experienced technician for help.

This device complies with Part 15 of the FCC Rules and with RSS-210 of lndustry Canada. Operation is subject to the following 
two conditions:

1)This device may not cause harmful interference, and….
2)This device must accept any interference received, including interference that may cause undesired operation.

WARNING

: Changes or modifications made to this equipment not expressly approved by the party responsible for compliance 

may void the FCC authorization to operate this equipment.

RF Exposure Statement The MTX-244 transmitter has been tested and meets the FCC RF exposure guidelines when used 
with the accessories supplied or designated for this product, and provided at least 20cm separation between the antenna the 
user\s body is maintained. Use of other accessories may not ensure compliance with FCC RF exposure guidelines.

FCC COMPLIANCE STATEMENT

The radio equipment type in this product is in compliance with EU Directive 2014/53/EU. The full text of the Declaration of Conformity is 
available at www.hpiracing.com/ce
Die Fernsteuerung in diesem Produkt ist in Übereinstimmung mit der EU Direktive 2014/53/EU. Die vollständige Konformitätserklärung ist 
erhältlich unter www.hpiracing.com/ce
La radiocommande dans ce produit satisfait aux directives CE 2014/53/EU. La déclaration de conformité complète est disponible sur www.
hpiracing.com/ce
La tipologia di apparecchiature radio in questo prodotto è conforme alla Direttiva 2014/53/EU. dell’Unione Europea. Il testo completo della 
Dichiarazione di Conformità è disponibile a sito: www.hpiracing.com/ce

CE COMPLIANCE STATEMENT

Содержание MTX-244













Отзывы: