background image

Note

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 

15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a 

residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not 

installed and used in accordance with the instructions, may cause harmful interference to radio communications. 

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does 

cause harmful interference to radio or television reception, which can be determined by turning the equipment off 

and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1.

Reorient or relocate the receiving antenna.

2.

Increase the separation between the equipment and receiver.

3.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

4.

Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two 

conditions: (1) this device may not cause harmful interference, and (2) this device must accept 

any interference received, including interference that may cause undesir ed operation.

Maverick Industries Inc. warrants this product to be free of defects in parts, materials and workmanship for a 

period of 1 year, from date of purchase. Should any repairs or servicing under this warranty be required, contact 

Maverick Customer Service by mail or phone for instructions on how to pack and ship the product to Maverick's 

National Service Center located as follows:

Maverick Customer Service

94 Mayfield Ave.

Edison NJ 08837

Telephone: (732) 417-9666

Hours: Weekdays 8:30 AM- 4:30 PM

www.maverickhousewares.com

Do not send any parts or product to Maverick without calling and obtaining a Return Authorization Number and 

instructions. This warranty is VOID if instructions for use are not followed; for accidental damage; for commercial 

use; for damage incurred while in transit; or if the scale has been tampered with. This warranty gives you specific 

legal rights and you may also have other rights, which vary from state to state.

MAVERICK LIMITED 1 YEAR WARRANTY

Содержание ET-77











Отзывы: