Useful New Functions
These are applicable to wide range of usages as various methods of use is possible by adding -LDe option.
Output control as Next A to D are possible.
Function for Pulse & Ramp Sequence and Master Follow (-LDe Option)
Note : Accuracy of the timer at sequence action ±0.5 %. Please take care usage at long running.
ta, tb, tc and toff can be set to 0.0 s, 1.0 s to 99.9 h, respectively
tb
tc
toff
a
b
c
ta
t 1
t 2
0 V (output off)
Output
ON
Output
OFF
t1
a
c
b
ta
t2
tb
t3
tc
t4 toff
0 V
(output off)
Set voltage
current
t1 and t2 can be set to 0 s to 999 s, respectively
Range of 0 to 999 s for t1 to t4 and range of 0.0 s, 1.0 s to 99.9 h for ta to tc and
toff can be set respectively.
Master
Slave1
Slave2
Pulse
Sequence setting
Ramp setting
Pulse
Sequence setting
Sequential operation is possible by using voltage and current set on each
memory a, b and c in combination with multi-set function. Not only
continuous operation, but also it is possible to specify the times.
It is best fit to evaluation tests for products as various operations, like as
repeat of a and b only or repeat of b, c and off only, are enabled by setting
time of memory a, b, c and off to 0.0.
A. Pulse Sequence
It enables to make ramp action up to set voltage or current (or from the
set voltage or current to 0 V or 0 A). It is useful to like to rise (reduce)
voltage or current slowly.
* For ramp action, it is possible to select “both of set voltage and current”,
“only set voltage” or “only set current”.
B. Ramp
It is also possible to use pulse sequence combined with ramp action.
If multi-set function is combined with the too, it is able to make sequence
action by using voltage or current set on memory a, b and c. Not only
continuous operation, but also it is possible to specify the times.
It is useful in various aspects as it is possible to rise (reduce) voltage or
current slowly up to 3 set value.
C. Pulse Se Ramp
D. Master Follow
Pulse sequence actions at master-slave and output signal to slave units
at ramp action are transmitted. By this function, it is possible to make
slave units to output on different output condition from the master unit.
05
