Matsusada AUH Series, Инструкция по эксплуатации

Страница: 19 / 28

4-1
４ Advanced Operation
4
Advanced Operation
４－１ Introduction
Explanations on Remote Programming Operations.
With this feature such functions as external voltage control or external monitor is available.
By using GP-IB/IEEE488 or RS 232C adapter (option), operation via PC is also possible.
４－２ Function of TB1 interface connector
List 4-1 Function of TB1 interface connector
TB1 SIGNAL PARAMETER
1 Remote Voltage Program In 0 to 10Vdc input = 0 to 100% rated output
2
Remote Current Program In 0 to 10Vdc input = 0 to 100% rated output
3
Output Current Monitor 0 to 10Vdc output = 0 to 100% rated output
4 Spare（out of use）
5 Common（GND of Power Supply）
For 1 , 2 , 3 , 14 , 15
6 Spare（out of use）
7 Door switch（
Interlock） Short = HV ON
8
Remote reset(for Option LOｃ,) Short = reset
9 Spare（out of use）
10 Spare（out of use）
11 Spare（out of use）
12 Spare（out of use）
13 Spare（out of use）
14
Reference voltage output Ref10.24V，4mA MAX output
15
Output Voltage Monitor 0 to 10Vdc output = 0 to 100% rated output
16 Spare（out of use）
17 Common（GND of Power Supply） For 7 , 8 , 19 , 20 , 21
18 Spare（out of use）
19 HV Status HV ON = internally relay contact is shorted
20 Internal control/external control select Short =External control Open =Internal control
21 Remote switch ON/OFF Short = HV ON Open = HV OFF
22 Spare（out of use）
23 Spare（out of use）
24 Spare（out of use）
25 Current Control : EXT/INT select Internal current control
1 13
14 25
S2 TB1
Fig 4-1 TB1 Connector，S2 Switch
20-17 short
25-2 short