background image

Mainboard User’s Manual 

 

This publication, photographs, illustrations and software are under 
the protection of international copyright laws and all rights 
reserved. It does not allow any reproduction of this manual, 
content and any materials contained herein without the written 
consent of the authentic manufacturer.  
The information in this manual is subject to change without notice. 
The manufacturer does neither represent nor warrant the contents 
hereof; and specifically disclaims any implied warranties of 
merchantability or fitness for any particular purpose. Furthermore, 
the manufacturer reserves the right to revise and change this 
publication from time to time, without the obligation of notifying 
any person of such revision or changes. 

Trademarks 

IBM, VGA, and PS/2 are registered trademarks of International 
Business Machines. 
Intel, Pentium, Pentium-II, Pentium-III, Pentium 4, MMX,  
Celeron and Tualatin are registered trademarks of Intel 
Corporation. 
Microsoft, MS-DOS and Windows 95/98/NT/2000/XP are 
registered trademarks of Microsoft Corporation. 
PC-cillin is a trademark of Trend Micro Inc. 
AMI is a trademark of American Megatrends Inc.   
MediaRing Talk is a registered trademark of MediaRing Inc. 
3Deep is a registered trademark of E-Color Inc. 
It has been acknowledged that all mentioned brands or product 
names are trademarks or registered trademarks of their respective 
holders.   

 
 
 
 

Copyright © 2002 

All Rights Reserved 

MS9118E Series, V1.1 

VT8751/May 2002 

 

Содержание MS9118E Series


















































Отзывы: