Matrox Vio, Установка и справочник по оборудованию

Страница: 10 / 60

Matrox Vio 9
Acquisition features
Matrox Vio Duo can acquire video data from an SD or HD analog or digital video
source; the analog path utilizes a multi-format decoder for capturing video data,
whereas the digital path uses a multi-rate deserializer. The table below summarizes
the supported acquisition video formats:
Video data is converted by the decoder or the deserializer into either YUV or
20-bit YCbCr. Grabbed images can then be transferred to the Host in
BGR24 packed, BGR32 packed, RGB24 planar, YUV, or monochrome pixel
formats. Images can be transferred to an auxiliary display, but the resolution of
the output has to be identical to the resolution of the image acquired.
Matrox Vio Duo can acquire data from only one video source at a time; however
you can attach several video sources and switch between them. You can connect
up to two analog (one CVBS and one RGB/YPbPr/YC) and two digital video
sources.
Display features
Matrox Vio Duo can output video to an auxiliary analog display device, an
auxiliary digital display device
1
, or to both simultaneously. Although the board
allows for simultaneous analog and digital display, the same information is sent
to both outputs.
Acquisition video formats
Transmission standard Digital video Analog video
1080i at 30 frames/sec HD-SDI YPbPr, RGB
720p at 60 frames/sec HD-SDI YPbPr, RGB
480i at 30 frames/sec HD-SDI YPbPr, RGB
576i at 25 frames/sec (PAL) SD-SDI
CVBS, RGB
1
, Y/C, YPbPr (non-square pixels)
1. Although the multi-format decoder can capture RGB analog video, it digitizes the data to 20-bit YCbCr.
480i at 30 frames/sec (NTSC) SD-SDI
CVBS, RGB
1
, Y/C, YPbPr (non-square pixels)
576i at 25 frames/sec (CCIR) - CVBS, RGB, Y/C, YPbPr (square pixels)
480i at 30 frames/sec (RS-170) - CVBS, RGB, Y/C, YPbPr (square pixels)
1. Except when outputting video captured with square pixel digitization.