Matrox Vio, Установка и справочник по оборудованию

Страница: 44 / 60

Electrical specifications 43
devices, the same information will be sent to both. In either mode, video can only
be output to the display device at the original acquisition resolution. Performs
static or dynamic overlaying of an image onto an underlay image.
• 128 Mbytes of 100 MHz DDR SDRAM used as acquisition and display memory.
1.6 Gbytes/sec of memory bandwidth and 64-bit wide data bus.
• 1 Mbyte flash EEPROM for storage of board data.
Electrical specifications
Dimensions and environmental
specifications
• Dimensions:
• Ventilation:
• Minimum/maximum ambient operating temperature: 0°C to 55°C
(32°F to 131°F).
• Minimum/maximum storage temperature: -40°C to 75°C.
• Operating humidity: 0 to 95% relative humidity (non-condensing).
• Storage humidity: 0 to 95% relative humidity (non-condensing).
Matrox Vio Duo (applies to PCB# Y7231-01)
Operating voltage and current Typical: 3.3 V, 2.48 A = 8.18 W
Typical 12.0 V, 0.73 A = 8.76 W
Total (typical) = 16.94 W
Board Dimensions
Matrox Vio Duo 16.3 L x 11.1 H 0.158 W cm (6.4" x 4.4" 0.062") from bottom edge
of goldfinger to top edge of board.
Board Ventilation
Matrox Vio Duo ~100 LFM between boards.