Connectors on Matrox Vio Duo 45
External digital video input connectors
The external digital video input connectors are standard, low profile, 75 Ohm
impedance BNC connectors, used to receive HD/SD-SDI video signals. The
connectors are shown in the following image.
Their pin assignment is as follows:
You can use a standard video cable (available from your local electronics store) to
interface with these connectors. If the cable has to be longer than normal, you will
need a very good cable, or very good components, in order to prevent loss.
Pin
Signal
Description
1
HD/SD_SDI_IN0
High definition or standard definition
serial digital video input 0.
2 (SHELL)
GND
Ground.
3
HD/SD_SDI_IN1
High definition or standard definition
serial digital video input 1.
4 (SHELL)
GND
Ground.
1
2
3
4
IN 1
IN 2
Содержание Vio
