Matrox Vio, Установка и справочник по оборудованию

Страница: 22 / 60

Connecting external devices 21
Connecting external devices
The Matrox Vio Duo board has five external interface connectors on its main
bracket and one internal connector. The expanded video input adapter board has
five external interface connectors and one internal connector.
Matrox Vio Duo main bracket: connectors
• Two external digital video input connectors. Two high-quality BNC connectors
used to receive digital video in HD/SD-SDI format.
• Two external digital video output connectors. Two high-quality BNC connectors
used to output digital video in HD/SD-SDI format. Both connectors output the
same video stream. The output is compatible with monitors using an HD/SD-SDI
input.
• One external analog video output connector. A high-quality 15-pin, D-type
(HD-15) connector, used to output analog video and digital synchronization
signals to an auxiliary display. The output is compatible with high-resolution TV
monitors.
• One internal expanded video input connector. A 40-pin male connector used to
transmit analog video and synchronization signals between the Matrox Vio Duo
board and the expanded video input adapter board. The connector is located on
the edge of the board, making the signals accessible from inside of the computer
enclosure.
Expanded video input adapter board: connectors
To access the signals of the internal expanded video input connector from outside
of the computer enclosure, you might have installed the corresponding adapter
board. The adapter board has five external BNC connectors and one internal
40-pin connector.
• Five expanded analog video input connectors. Five standard, low profile, 75 Ohm
impedance BNC connectors, used to input video signals.
• One internal connector. One 40-pin connector to connect to the internal
expanded video input connector on the Matrox Vio Duo board.