Matrox Solios eV-CL, Установка и справочник по оборудованию

Страница: 107 / 120

Connectors on Matrox Solios eV-CLBL and Matrox Solios eV-CLFL boards 107
Pin Hardware signal name MIL constant for
auxiliary signal
*
Digitizer device
number for
auxiliary signal
Description
1 P0_TTL_AUX_IO_0 M_AUX_IO8 M_DEV0 TTL auxiliary signal (input/output) for acquisition path 0,
which supports: timer output (M_TIMER3 on M_DEV0),
trigger input (trigger controller 0 on acq path 0), user
input, user output (M_USER_BIT2), or field polarity input.
2 GND Ground.
4+,3- P0_OPTO_AUX_IN0 M_AUX_IO6 M_DEV0 Opto-isolated auxiliary signal (input) for acquisition path
0, which supports: trigger input (trigger controller 0 on
acq path 0), user input, or field polarity input.
6+,5- P0_LVDS_AUX_IN0 M_AUX_IO10 M_DEV0 LVDS auxiliary signal (input) for acquisition path 0, which
supports: trigger input (trigger controller 0 on acq path
0), user input, field polarity input, or quadrature input bit
0.
7+,9- P0_OPTO_AUX_IN1 M_AUX_IO7 M_DEV0 Opto-isolated auxiliary signal (input) for acquisition path
0, which supports: trigger input (trigger controller 1 on
acq path 0) or user input.
8 NC Not connected.
10 NC Not connected.
*. These MIL constants represent the signals as of MIL 10. The signals that were previously represented by M_HARDWARE_PORTn became represented by
M_AUX_IOn (where the value of n remained the same between the constants). For a complete list of changes between previous MIL versions and MIL 10,
see
MILSoliosCameraLinkIOConversionTable
within
MIL Release Notes
.