Board input and output connectors
53
* N/C = Not connected. This means that the pin is defined as part of the
VMChannel interface standard but it is not used on the
Matrox Meteor-II /Standard board.
Auxiliary power supply input
The auxiliary power supply input connector is a standard 4-pin male connector
that routes power from the computer to a camera (via the DB-44). Use the 4-pin
power cable provided with your board to connect to the power supply of your
computer. The operating current is 1.5 A with an auto-resettable fuse. Note that
this input is not available on the CompactPCI and PC/104
-Plus
form factors.
The pinout of the auxiliary power supply input connector is as follows:
18
DATA[10]
52
DATA[11]
19
DGND
53
DATA[12]
20
DATA[13]
54
DGND
21
DATA[14]
55
DATA[15]
22
DGND
56
DATA[16]
23
DATA[17]
57
DGND
24
DATA[18]
58
DATA[19]
25
DGND
59
DATA[20]
26
DATA[21]
60
DGND
27
DATA[22]
61
DATA[23]
28
DGND
62
DATA[24]
29
DATA[25]
63
DGND
30
DATA[26]
64
DATA[27]
31
DGND
65
DATA[28]
32
DATA[29]
66
DGND
33
DATA[30]
67
DATA[31]
34
DGND
68
SBN
Pin
Description
1
+5 V
2
Ground
3
Ground
4
+12 V
Pin
Signal
Pin
Signal
4
3
2
1
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
