24
Chapter 2: Hardware installation
Matrox Meteor-II /Standard for CompactPCI
Matrox Meteor-II for CompactPCI has three connectors, which are indicated in
the diagram below. Two of these connectors are located on its bracket, and are
discussed in detail in Appendix B.
•
Video input connector.
Used to receive analog video, as well as send and receive
synchronization signals and power.
•
BNC connector.
Used to receive composite analog video.
•
CompactPCI connector.
Used to connect your board to the PCI bus.
Connecting a video input to Meteor-II /Standard for PCI or
CompactPCI
You can connect video sources to Matrox Meteor-II /Standard’s video input
connector, using the optional DBHD44-TO-13BNC cable. This cable has
thirteen BNC connectors and a 44-pin high-density D-Subminiature plug. The
wires of the cable are listed in the following table.
CompactPCI connector
Video input
BNC
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com