Installing Matrox Meteor-II /Standard
19
3. Press the board firmly but carefully into the connector.
4. When the board is in place, the handle opens automatically, exposing a screw.
Tighten both this screw, and the one at the top of the bracket.
5. Connect your video sources. For details, see the
Connecting external devices
section.
6. Turn on your computer.
In some cases, when you boot your computer, Windows’ Plug-and-Play system
will detect a new PCI card and you will be asked to assign a driver to it. At this
point, you should
click on
Cancel
because the driver will be installed during the
installation of MIL or one of its derivatives.
Installing Matrox Meteor-II /Standard for PC/104
-Plus
This section refers to the stand-alone version of Matrox Meteor-II /Standard for
PC/104-
Plus
. The version pre-configured for Matrox 4Sight-II is not discussed in
this manual. For more information, see
Note about Matrox Meteor-II /Standard for
PC/104-Plus
later in this chapter.
Guide
CompactPCI
connector
Back plate
of subrack
Screw
Handle
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com