Installing Matrox Meteor-II /Standard
21
5. Carefully position Matrox Meteor-II over the connectors and press the board
firmly into place.
6. Replace the anchoring screws.
7. Set the rotary switch (next to the PC/104 (ISA) connector) to 0 if installing the
first stackable board, or another appropriate setting if not the first. See the section,
Multiple board installation
, in Chapter 3.
8. Connect your video sources. For details, see the
Connecting external devices
section.
9. Turn on your computer.
In some cases, when you boot your computer, Windows’ Plug-and-Play system
will detect a new PCI card and you will be asked to assign a driver to it. At this
point, you should
click on
Cancel
because the driver will be installed during the
installation of MIL or one of its derivatives.
Motherboard
PC/104-
(PCI) connector
Plus
PC/104
(ISA)
P1 and P2
connectors
Rotary
switch
Video input
connector
P1
P2
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com