Matrox MC-100 Скачать руководство пользователя страница 19 | Manualshive

Страница: 19 / 52

Matrox MC-100 Скачать руководство пользователя страница 19

11

Using the MC-100 DIP switches

Using the MC-100 DIP switches

Matrox MC-100 features eight DIP switches on the side of the unit for
locking/unlocking the on-screen display (OSD) buttons, displaying the OSD or
heads-up display (HUD) on the SDI or HDMI output, enabling/disabling the
loss-of-signal switcher feature, and loading user-defined settings. A DIP switch
is ON when the switch is down, and OFF when it is up.

•

DIP switch 1

When ON, the OSD buttons are locked and will not function.

•

DIP switch 2

When ON, the OSD or HUD is displayed on the SDI

outputs.

•

DIP switch 3

When ON, the OSD or HUD is not displayed on the HDMI

output.

•

DIP switch 4

When ON, the loss-of-signal switcher feature is enabled (see

“Loss-of-signal switcher”

•

DIP switches 5 to 8

Used for loading user-defined presets of input, output,

and 3D settings. For information on how to save user-defined presets, see

“Saving option settings”

.

¦

Note

MC-100 can have only one user-defined preset loaded at any given

time. This means that if a DIP switch associated with a user-defined preset is
ON, you must turn it OFF before loading another preset.

MC-100

OFF

ON

«
...
17
18
19
20
21
...
»

Содержание MC-100





















































Отзывы:

Нет отзывов