Matrox MC-100 Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 52

Matrox MC-100 Скачать руководство пользователя страница 6

iv

Matrox License Agreement, Warranty, and Service

I. Choice of Law

This Agreement shall be governed by and interpreted in accordance with the laws of the Province of
Quebec, excluding any conflict of laws provisions. All disputes arising out of this Agreement shall be
subject to the exclusive jurisdiction of the courts of the Province of Quebec, district of Montreal, and the
parties agree and submit to the personal and exclusive jurisdiction and venue of these Courts.

J. Procedure for returning goods

No returned goods, for service or otherwise, will be accepted without prior authorization from Matrox. To
obtain return authorization, contact Matrox MC-100 Customer Support (see the contact information at

www.matrox.com/video/support

). Once approved, Matrox will contact you with your Returned

Merchandise Authorization (RMA) number. Matrox cannot be responsible for units returned without an
RMA number. Matrox will advise you of the shipping address. The packaging must indicate the RMA
number on the outside. It is strongly recommended that a copy of the original packing slip which states the
serial number of the items you're returning be included with the returned merchandise. This will speed up
processing.

Each individual, returned unit or group of units MUST have an RMA number issued by Matrox. Matrox
must authorize the number of units grouped under one RMA number. Any units received without prior
approval by Matrox will be returned to you freight collect.

You shall be responsible for the cost of consolidated freight (one way only) for warranty units from your
location to the location designated by Matrox. Once repaired, Matrox will incur the cost of consolidated
freight for warranty units to your location.

«
...
4
5
6
7
8
...
»

Содержание MC-100





















































Отзывы:

Нет отзывов