Matrox MC-100 Скачать руководство пользователя страница 21 | Manualshive

Страница: 21 / 52

Matrox MC-100 Скачать руководство пользователя страница 21

13

Loss-of-signal switcher

Loss-of-signal switcher

If you have two input channels connected to MC-100, and an SDI/HDMI output
is set to

Channel 1

or

Channel 2

(see

“Specifying your output settings”

), the loss-of-signal switcher feature enables MC-100 to automatically

switch to the other channel if a loss of signal is detected on the channel that was
selected for that output. For example, if you have two 1920× 1080p video input
signals connected to different SDI inputs, and SDI 3 and HDMI are set to output
channel 2, MC-100 will automatically switch to channel 1 on the SDI 3 and
HDMI outputs if a signal loss is detected on channel 2. Switching between
channel 1 and channel 2 is done glitch-free on SDI outputs only. To enable or
disable the loss-of-signal switcher feature, set DIP switch 4 accordingly (see

“Using the MC-100 DIP switches”

¦

Note

The loss-of-signal switcher feature should not be used when working

with a 3G level B input signal. Since channels 1 and 2 on 3G level B signals are
on the same SDI cable, the signal loss will affect both channels.

Using the OSD buttons

The on-screen display (OSD) buttons are used to navigate through the Matrox
MC-100 options in the OSD menu.

¦

Note

You can lock the OSD buttons by using DIP switch 1 (see

MC-100 DIP switches”

•

and

(Cycle buttons) Use these buttons to cycle through the OSD

menu options and settings, or available settings when in selection mode (see

“Using the MC-100 selection modes”

•

(Select button) Use this button to select the highlighted OSD menu

option, currently selected option, or to exit selection mode (see

MC-100 selection modes”

).

+

«
...
19
20
21
22
23
...
»

Содержание MC-100





















































Отзывы:

Нет отзывов