Matrox MC-100 Скачать руководство пользователя страница 31 | Manualshive

Страница: 31 / 52

Matrox MC-100 Скачать руководство пользователя страница 31

23

Saving option settings

Saving option settings

The

SAVE SETTINGS

menu allows you to save the currently selected input,

output, and 3D settings to one of four available DIP switches (DIP switches 5 to
8) so that you can quickly set the appropriate settings for a particular workflow
by simply turning the corresponding DIP switch ON. See

“Using the MC-100

DIP switches”

for more information. The

SAVE SETTINGS

menu

also allows you to restore the settings for the MC-100 options back to factory
defaults.

¦

Note

MC-100 can have only one user-defined preset loaded at any given time.

This means that if a DIP switch associated with a user-defined preset is ON, you
must turn it OFF before loading another preset.

°

To save option settings to a DIP switch:

1

Access the Matrox MC-100 on-screen display (OSD) main menu.

2

Select

SAVE SETTINGS

from the OSD main menu.

3

Select the DIP switch to which you want to save the current MC-100
settings.

Resetting the DIP switches to factory defaults

To restore the settings for the MC-100 options back to factory defaults, select

FACTORY DEFAULT

in the

SAVE SETTINGS

menu.

¡ Important

This action cannot be undone.

«
...
29
30
31
32
33
...
»

Содержание MC-100





















































Отзывы:

Нет отзывов