Matrox M264, Инструкция по установке и эксплуатации

Страница: 49 / 74

37
Using the Matrox M264 card in topology-based workflows
Creating a capture topology using the inputs of
another card in mvTopologyBuilder
In mvTopologyBuilder, you can create a real time topology workflow for the Matrox
M264 card that captures the SDI inputs of a Matrox I/O card as follows:
1
Open mvTopologyBuilder.
2 Select the genlock settings.
3
Create a new topology with the following settings:
$
Card profile: Matrox card whose SDI inputs you would like to capture.
$
Usable clock: Genlock clock on the Matrox card.
$
Destroy on close.
4
Create a card node with the following settings:
$
Node name: Card node 1.
$
Content: Video.
$
Write-to-read delay: 1 frame.
$
Depth: 8 frames.
$
Video resolution: 1080i.
$
Video surface format: YUYV 422.
$
Video colorimetry: ITUR BT 709.
$
Any VANC format.
5 Create an input stream with the following settings:
$
Output node: Card node 1.
$
Input connector: SDI IN A.
6
Create a host node (Node name: Host node 1) with the same settings as the card
node in step
4 .
7 Create a transfer stream between the card node and the host node in which the
transfer direction is from card node to host node.
8
Create a compressed host node with the following settings:
$
Node name: Compressed host node 1.
$
Content: Video.
$
Video resolution: same as the host node in step 6 .