Matrox M264, Инструкция по установке и эксплуатации

Страница: 22 / 74

10
Chapter 3, Installing Your Matrox M264 Hardware
Installing your Matrox M264 card
Matrox M264 is a half-length card which can operate in a PCI Express (PCIe)
Gen2 x8 or x16 slot, wired electrically with 8 or 4 lanes (8 lanes are recommended for
optimal performance). If the slot in which you’ll be installing your Matrox M264 card
contains another card, either move it to an unused slot or remove it completely.
° To install your Matrox M264 card:
1 Remove the metal plate located at the back of the slot you’ll be using for your
Matrox M264 card.
2
Position your Matrox M264 card over the slot that you’ve chosen and push it in
firmly and evenly until it is fully seated in the slot.
Remarks
$
To avoid overheating issues, don’t install the Matrox M264 close to another
card that generates heat, such as a display card.
$
To allow sufficient airflow to the Matrox M264 card’s fan, provide sufficient
clearance between the Matrox M264 card’s fan and the adjacent card.
3
Secure the Matrox M264 card to the computer frame.
Before restarting your computer
Once you’ve finished installing all your DSX hardware, replace your computer’s
cover before restarting your computer. You can now install the Matrox DSX software
as explained in
Chapter 5, “Installing Your DSX Software for Windows,” on page 29
or Chapter 6, “Installing Your DSX Software for Linux,” on page 37 .
m
Matrox M264 card