Matrox M264, Инструкция по установке и эксплуатации

Страница: 26 / 74

14
Chapter 4, Installing Your DSX Software for Windows
On a Windows 10, Windows 8.1, or Windows Server 2012 system, the tiles for
uninstalling Matrox DSX.sdk and Matrox DSX.utils may not be added to the Apps
view. If this occurs, you can uninstall Matrox DSX.sdk or Matrox DSX.utils as
follows:
1
In Control Panel , switch to Small icons view , then choose Program and
Features .
2 Choose Matrox DSX.sdk or Matrox DSX.utils .
3
Click Uninstall , then click Next .
After Matrox DSX.sdk or Matrox DSX.utils has been successfully removed from
your computer, click
OK .
Additional installation information
This section includes supporting information that is related to installing the DSX
software.
Ignoring the Found New Hardware Wizard
Turn on your computer. Once Windows starts, your DSX hardware will be detected. If
the “Found New Hardware Wizard” appears, press
ESC
or click Cancel to close the
wizard because the Matrox DSX.utils Setup program will automatically detect your
devices and install the appropriate drivers. The wizard only appears the first time you
start your computer after installing your DSX hardware.
If Windows launches the “Found New Hardware Wizard,” it will appear for each of
your DSX hardware components. Close the wizard each time it appears. To ensure a
smooth DSX software installation, it is essential that you do not let the wizard try to
install any drivers.
Disabling Sleep and Hibernate modes in
Windows 10, 8, and 7
On a Windows operating system, sleep or hibernate modes can be used as alternatives
to a full shutdown of your system. On a system with Matrox DSX installed, these
alternative shutdown states can cause your system to become unstable and must be
disabled.
You can disable Sleep and Hibernate modes from the Windows Control Panel.
1
In Control Panel , choose Hardware and Sound or System and Security >
Power Options .
¦ Note
On Windows 10, 8, or 7, Hardware and Sound and System and
Security appear if you are in the default Category view. Otherwise, only Power
Options appears.
2
Under your selected power plan, click Change plan settings , then click
Change advanced power settings .